Autopilot code in config. VS and Priv

This is the location for all mods to collaborate. Anyone making or planning their own mod should post help requests, screen shots and news here.

Moderators: Omega, tillias, Mod Contributor

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 2:47 pm

Before the move about six or seven years ago, and the requisite going through old junk, we had some old Sinclairs kicking around the house. Mom's computer classes involved punch cards! How do the alt and ctrl key bindings work on macs? I know they are called different things, perhaps three main mapping sets?
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Share On:

Share on Facebook Facebook Share on Twitter Twitter Share on Digg Digg

Re: Autopilot code in config. VS and Priv

Postby pheonixstorm » Thu Nov 10, 2011 2:54 pm

ok, kill the remake and move to Priv parallel universe. You will get much MUCH better fps. I STOPPED playing the remake when i made my system horribly slow, even on a high end machine (at the time). Most of my issue was the use of a 3D ship on a 2d base landing screen. For whatever reason I think the remake is bugged too much on the data side which is causing the issues. Try a fresh install of Gemini Gold and parallel universe and tell me how the fps goes.
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1567
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 3:01 pm

Love that thread drift!!
If you want the most faithful Original Privateer experience look up DosBox and install your old copy. I know the expanded universe and ships is what drew me to some of the VS based Privateer games. Then the most promising one (WCU) kinda died.
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Re: Autopilot code in config. VS and Priv

Postby klauss » Thu Nov 10, 2011 3:11 pm

travists wrote:How do the alt and ctrl key bindings work on macs? I know they are called different things, perhaps three main mapping sets?


Good point.
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7243
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: Autopilot code in config. VS and Priv

Postby klauss » Thu Nov 10, 2011 3:12 pm

travists wrote:Then the most promising one (WCU) kinda died.


WCU was never a game, just a bunch of assets people could build games on top of.

IIRC, PU is built on top of WCU.
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7243
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 3:32 pm

Something like that, then parred way back. Last I saw everything outside of Gemini was deactivated, A few updates to the three main game ships... Might play it again But I have the setup I mentioned above, so if I want to play "Privateer" that's what I play.
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 3:54 pm

Man, talk about a stroll down memory lane!

klauss wrote:I think I still have my old commodore 128, only I don't have a PSU for it.


Yeah, I used an old game pad controller or some such for a mouse with my 64. Remember what those cost? Like fifteen hundred for a full system and it didn't include a hard drive. Strictly tape and single or double sided 5 1/4" floppy. Gah!

klauss wrote:The config isn't different, but SDL in linux sometimes has a hard time picking up certain key modifiers, or key-modifier combinations, so some key bindings are impossible to hit in linux, depending on the keymap being used.

We really should ship two preconfigured key bindings at least: linux and windows.


That could explain some of it. Especially between the two boxes. Even with copying the file over, I can't get AutoKey working in Boo-Boo.

klauss wrote:About performance... perhaps your X.org doesn't have the DRI module loaded?
You could avoid a lot of trial and error by looking the messages in /var/log/Xorg.0.log


It does, supposedly.
Here it is.

Code: Select all
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
Current Operating System: Linux FRED-Mini-2 2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5094df8b-2c87-4aa9-9804-eb76cc3c1d4f ro splash vga=773 i915.modeset=0
Build Date: 20 October 2011  03:05:54PM
xorg-server 2:1.7.6-2ubuntu7.10 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.16.4
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 10 15:35:30 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
   Entry deleted from font path.
(**) FontPath set to:
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins,
   /usr/share/fonts/X11/misc,
   /usr/share/fonts/X11/100dpi/:unscaled,
   /usr/share/fonts/X11/75dpi/:unscaled,
   /usr/share/fonts/X11/Type1,
   /usr/share/fonts/X11/100dpi,
   /usr/share/fonts/X11/75dpi,
   /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
   built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 6.0
   X.Org XInput driver : 7.0
   X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2572:103c:12bc Intel Corporation 82865G Integrated Graphics Controller rev 2, Mem @ 0xf0000000/134217728, 0xfc400000/524288, I/O @ 0x000014d0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.1.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 2.9.1
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 0.1.0
   ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 865G
(--) intel(0): Chipset: "865G"
(--) intel(0): Linear framebuffer at 0xF0000000
(--) intel(0): IO registers at addr 0xFC400000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 1 display pipe available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers/ivch.so
(II) Module ivch: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers/tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers/ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID for output VGA
(II) intel(0): Manufacturer: HSD  Model: 2469  Serial#: 16843009
(II) intel(0): Year: 2008  Week: 42
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync:  Separate  SyncOnGreen
(II) intel(0): Max Image Size [cm]: horiz.: 47  vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.349   greenX: 0.284 greenY: 0.617
(II) intel(0): blueX: 0.142 blueY: 0.067   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1680  vsize 1050  refresh: 75  vid: 4019
(II) intel(0): #1: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) intel(0): #2: hsize: 1400  vsize 1050  refresh: 60  vid: 16528
(II) intel(0): #3: hsize: 1400  vsize 1050  refresh: 75  vid: 20368
(II) intel(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) intel(0): #5: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) intel(0): #6: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) intel(0): #7: hsize: 1600  vsize 1200  refresh: 75  vid: 20393
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 146.2 MHz   Image Size:  474 x 297 mm
(II) intel(0): h_active: 1680  h_sync: 1784  h_sync_end 1960 h_blank_end 2240 h_border: 0
(II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1078 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 24 H max: 94 kHz, PixClock max 210 MHz
(II) intel(0): Serial No: 842MJ3XY12675
(II) intel(0): Monitor name: Hanns.G Hi221
(II) intel(0): EDID (in hex):
(II) intel(0):    00ffffffffffff002264692401010101
(II) intel(0):    2a1201030a2f1e78eedc55a359489e24
(II) intel(0):    115054bfef80b30fa9409040904f8180
(II) intel(0):    8140714fa94f21399030621a1c4068b0
(II) intel(0):    3600da291100001c000000fd00384c18
(II) intel(0):    5e15000a202020202020000000ff0038
(II) intel(0):    34324d4a3358593132363735000000fc
(II) intel(0):    0048616e6e732e4720486932323100d2
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Printing probed modes for output VGA
(II) intel(0): Modeline "1680x1050"x60.6  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1600x1200"x75.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1680x1050"x74.9  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1400x1050"x74.9  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1680x1050
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (470, 300) mm
(**) intel(0): DPI set to (90, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 233472 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 933884 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x07fff000 (pgoffset 32767)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x007df000:            end of stolen memory
(II) intel(0): 0x007df000-0x07ffefff: DRI memory manager (123008 kB)
(II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x0000000023daa000 physical
)
(II) intel(0): 0x08000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007df000:            start of memory manager
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x00800000-0x00804fff: HW cursors (20 kB)
(II) intel(0): 0x07fff000:            end of memory manager
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.7.6, module version = 2.3.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:rwin_switch,compose:lwin"
(II) XKB: reuse xkmfile /var/lib/xkb/server-5A8151053F8FB85705DAE2B5E82A5B3D08A51C63.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:rwin_switch,compose:lwin"
(II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event4)
(**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech Logitech USB Optical Mouse: always reports core events
(**) Logitech Logitech USB Optical Mouse: Device: "/dev/input/event4"
(II) Logitech Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech Logitech USB Optical Mouse: Found relative axes
(II) Logitech Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE)
(II) Logitech Logitech USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:rwin_switch,compose:lwin"
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event5)
(**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event5"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Found relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1078 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0  187.00  1680 1800 1976 2272  1050 1053 1059 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  202.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
(II) intel(0): EDID vendor "HSD", prod id 9321
(II) config/udev: removing device Logitech Logitech USB Optical Mouse
(II) Logitech Logitech USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event4)
(**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech Logitech USB Optical Mouse: always reports core events
(**) Logitech Logitech USB Optical Mouse: Device: "/dev/input/event4"
(II) Logitech Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech Logitech USB Optical Mouse: Found relative axes
(II) Logitech Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE)
(II) Logitech Logitech USB Optical Mouse: initialized for relative axes.


I really am thankful for the code box. Getting the Max size limit error. On to the next post.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 3:58 pm

Wendy-J wrote:I really am thankful for the code box. Getting the Max size limit error. On to the next post.

Came across as a quote, code box has a scroll bar too, nice for long stretches.

Edit: never mind, you must have seen that....
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 4:01 pm

It was a nightmare on this last trial.

I loaded, took out my Gleaner from mining base to Atlantis. Launched. When I finally had more than 3 FPS, I undocked, set course and engaged auto pilot.

I went to get a cup of coffee, swept out the garage, finished my coffee, sat back down and had to press Y to disengage combat mode, set it to full throttle, then stand on the AB key to get docked. Took forever.

THEN, as Atlantis was loading, the screen went blank. There were some noise lines in green and some assorted colours in the top third, then the screen started cycling between NO SIGNAL and signal, flashing the monitor's error message, "No Video Signal" then to black, then "No Video Signal".

Took a hard boot to get back up and running.

Anywho, there you be. Hope I'm not driving you bonkers.

W.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 4:02 pm

travists wrote:
Wendy-J wrote:I really am thankful for the code box. Getting the Max size limit error. On to the next post.

Came across as a quote, code box has a scroll bar too, nice for long stretches.

Edit: never mind, you must have seen that....


Sure did. I caught it and fixed it moments later.

Thanks for the catch. =)
W.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 4:07 pm

Wendy-J wrote:THEN, as Atlantis was loading, the screen went blank. There were some noise lines in green and some assorted colours in the top third, then the screen started cycling between NO SIGNAL and signal, flashing the monitor's error message, "No Video Signal" then to black, then "No Video Signal".

Took a hard boot to get back up and running.


Sounds almost hardware, posibly over heating. Does your video card have a fan or a heat sink? If a fan is it spinning while on? (They do go out.) Try some other graphics intensive programs. I think you said you have multiple OSs? Do you get similar errors in others?
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 4:23 pm

travists wrote:Sounds almost hardware, posibly over heating. Does your video card have a fan or a heat sink? If a fan is it spinning while on? (They do go out.) Try some other graphics intensive programs. I think you said you have multiple OSs? Do you get similar errors in others?


It's integrated on the MoBo. Has a huge heat sink. No, I don't think it's overheating. If it were, a hard reboot wouldn't bring it back until it cooled. That could take ages given the size of the heat sink. You need to remember that heat-sinks take away heat, yet they remain hot as they dissipate heat. No, it MAY be hardware, true. The chip COULD be failing.

Phoenix, I'm not playing the new PU. I don't have the machine for it. Not enough oomph in the video department. When I get a few C together, I'll get a new MoBo, some RAM, a 10TB HDD and a nice, 2G nVidia video card with HDMI in/outputs so I can use the televisions as monitors. Think of it. 42" wide-screen monitors! You sit up close and you're really and truly IN the game. Until then, I'll make due with an old 3G dual core proc. and maybe a gig or gig-and-a-half of shared RAM on a 22" Hanns-G 16 X 10 monitor.

W.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby klauss » Thu Nov 10, 2011 4:35 pm

Curious, everything seems fine in X. Except that your monitor connection was flapping near the end.

What are the first lines of stdout/stderr in VS? (they talk about the graphics drivers and capabilities).
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7243
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: Autopilot code in config. VS and Priv

Postby pheonixstorm » Thu Nov 10, 2011 4:37 pm

You should be able to run PPU as the svn (not the cubemap version) still runs on either .4.3 or .5.0 i think, probably the later. I was running it on a single core Athlon64 way back. Heres a question though. In the bios setting can you increase the shared memory or your onboard video? the few i've had to deal with would allow either 256mb or 512mb max, defaulting to 128mb though.
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1567
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: Autopilot code in config. VS and Priv

Postby travists » Thu Nov 10, 2011 4:44 pm

Relatively easy test. Try an add on card... Then I work in a computer shop so we have a few pulled one lying around to test with. But yeah, if it's a heat sink it won't be overheating easily. There's bad memory addresses (rare), software issues (common but unlikely if the display is loosing signal esp. w/ the lines), loose connectors. Sight-unseen I'm just guessing :( Wish I could do more. I do think your preformance issues and dying video are related though.

Good point, phoenix! more memory should boost preformance on an on-board adapter.
User avatar
travists
Expert Mercenary
Expert Mercenary
 
Posts: 893
Topics: 33
Joined: Thu Jul 08, 2010 4:43 pm
Location: Sol III North American Continent

Re: Autopilot code in config. VS and Priv

Postby pheonixstorm » Thu Nov 10, 2011 5:02 pm

Yeah, but at the cost of system memory. That was the one good thing about the 6100 onboard sets, then ran system memory much more efficiently and I think some of the higher end onboard setups had a small amount of dedicated memory as well (i think)
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1567
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:17 pm

klauss wrote:Curious, everything seems fine in X. Except that your monitor connection was flapping near the end.

What are the first lines of stdout/stderr in VS? (they talk about the graphics drivers and capabilities).


I didn't used to be this dense. I can find them in doze, but I can't seem to find them in Linux.
Running as a user, the files would be in the home directory for that user.
Running as root, they should be in root, or in the VS home directory -- the place I extracted to and installed from. No dice. I even looked in /usr/share/games! I'm at a loss. I installed VS to /home/vegastrike-0-5-0. That way, I could share the game and files. So when I look to the user's directory, /home/wendy, I see the directory .vegastrike-0.5.0, but I still can't find the files! Looking at root's files, I run into the same problem. What have I done wrong?

W
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:19 pm

pheonixstorm wrote:You should be able to run PPU as the svn (not the cubemap version) still runs on either .4.3 or .5.0 i think, probably the later. I was running it on a single core Athlon64 way back. Heres a question though. In the bios setting can you increase the shared memory or your onboard video? the few i've had to deal with would allow either 256mb or 512mb max, defaulting to 128mb though.



Here goes another reboot. I'll have to check. It's been a while since I was in this thing's BIOS. Good thought though.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby klauss » Thu Nov 10, 2011 5:20 pm

Wendy-J wrote:I didn't used to be this dense. I can find them in doze, but I can't seem to find them in Linux.


Lol, don't worry. It's not quite so intuitive.

In linux, it's not stored anywhere, it comes out the console.
So you have to launch the game and redirect output to a file, like so:

Code: Select all
$ ./vegastrike > stdout.txt 2> stderr.txt
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7243
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:23 pm

travists wrote:Relatively easy test. Try an add on card... Then I work in a computer shop so we have a few pulled one lying around to test with. But yeah, if it's a heat sink it won't be overheating easily. There's bad memory addresses (rare), software issues (common but unlikely if the display is loosing signal esp. w/ the lines), loose connectors. Sight-unseen I'm just guessing :( Wish I could do more. I do think your preformance issues and dying video are related though.

Good point, phoenix! more memory should boost preformance on an on-board adapter.



Nice idea -- If I want to take the system out of the case OR buy a new video card. Remember, this is a slimline desktop. Even THEN, I'd have to get a PCI card. I have a number of AGP cards ranging from 8MB to 64MB, but the only PCI card I have only has 2MB of Video RAM. This box doesn't have an AGP slot.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:25 pm

klauss wrote:
Wendy-J wrote:I didn't used to be this dense. I can find them in doze, but I can't seem to find them in Linux.


Lol, don't worry. It's not quite so intuitive.

In linux, it's not stored anywhere, it comes out the console.
So you have to launch the game and redirect output to a file, like so:

Code: Select all
$ ./vegastrike > stdout.txt 2> stderr.txt



The resounding THUD you just heard and very probably felt, was my head hitting the desk.
I sit there and WATCH the game in text format when I'm playing it in windowed mode. I'll run it again. <sigh> Wanna bet I can't replicate the crash?
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:28 pm

pheonixstorm wrote:Yeah, but at the cost of system memory. That was the one good thing about the 6100 onboard sets, then ran system memory much more efficiently and I think some of the higher end onboard setups had a small amount of dedicated memory as well (i think)


THat's why I can play VS with very little frame dropping on my Mandrivel box! It's a Biostar TForce 6100 board and it's MAXED out for Video RAM versus System RAM. Sadly, THAT board only has a 64MB window. Still, it dedicates that RAM for video, so there is very little system slowing when I play the game.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 5:30 pm

Now for a system reboot, a look at BIOS for any possible tweaks, then a reboot to see if I can replicate the failure. Anyone want to place odds on whether or not I can get it to replicate the failure?

W.
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 6:20 pm

Grr...

Stdout is an empty file.
stderr is as follows:
Code: Select all
bash: ./vegastrike: No such file or directory


I LOVE tracking down problems. :twisted:
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm

Re: Autopilot code in config. VS and Priv

Postby Wendy-J » Thu Nov 10, 2011 6:22 pm

Here's what was left in my console.

Code: Select all
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Python launched merchant_guild Plowshare.stock FG September with 17 ships
Upgrading Engine engine00 percent 0.217391
Upgrading Shield dualshield02 percent 0.500000
Upgrading Shield4 quadshield02 percent 0.500000
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield01 percent 1.000000
Upgrading Shield4 quadshield03 percent 0.257143
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield03 percent 0.285714
Upgrading Shield4 quadshield03 percent 0.250000
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.222222
Upgrading Shield4 quadshield04 percent 0.187500
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.222222
Upgrading Shield4 quadshield06 percent 0.238462
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield01 percent 1.000000
Upgrading Shield4 quadshield03 percent 0.257143
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield05 percent 0.150000
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield06 percent 0.153846
Upgrading Shield4 quadshield06 percent 0.125000
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield03 percent 0.250000
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.222222
Upgrading Shield4 quadshield06 percent 0.238462
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield03 percent 0.285714
Upgrading Shield4 quadshield03 percent 0.250000
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield03 percent 0.285714
Upgrading Shield4 quadshield01 percent 1.000000
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield03 percent 0.285714
Upgrading Shield4 quadshield01 percent 1.000000
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield03 percent 0.250000
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield05 percent 0.150000
Python launched pirates Plowshare FG Sophocles_Squadron with 4 ships
Python launched pirates Gleaner FG Sophocles_Squadron with 2 ships
Python launched pirates Hyena FG Sophocles_Squadron with 4 ships
Python launched pirates Hyena FG Willamette_Squadron with 4 ships
Python launched pirates Plowshare FG Djakarta_Squadron with 4 ships
Python launched andolian Franklin FG West_Lafayette_Squadron with 14 ships
Python launched andolian archimedes FG West_Lafayette_Squadron with 3 ships
Python launched andolian Goddard FG Nelson_Squadron with 14 ships
Python launched andolian kahan FG Nelson_Squadron with 3 ships
Python launched andolian Schroedinger FG Valencia_Squadron with 14 ships
Python launched andolian kahan FG Valencia_Squadron with 3 ships
Python launched highborn Lancelot FG Ellijay_Squadron with 6 ships
Python launched highborn Clydesdale FG Ellijay_Squadron with 2 ships
Python launched highborn Gawain FG Ellijay_Squadron with 3 ships
Python launched highborn Gawain FG Winston-Salem_Squadron with 3 ships
Python launched shaper Progeny FG St_Denis_R�union_Squadron with 9 ships
Python launched shaper Midwife FG St_Denis_R�union_Squadron with 2 ships
Python launched shaper Ancestor FG St_Denis_R�union_Squadron with 9 ships
Python launched shaper Progeny FG New_Orleans_Squadron with 9 ships
Python launched shaper Clydesdale FG New_Orleans_Squadron with 1 ships
Python launched unadorned Franklin FG Atkinson_Squadron with 3 ships
Python launched unadorned kahan FG Atkinson_Squadron with 1 ships
Python launched purist Pacifier FG Perrysburg_Squadron with 19 ships
Python launched purist Clydesdale FG Perrysburg_Squadron with 3 ships
Python launched purist Admonisher FG Haarlem_Squadron with 19 ships
Python launched purist Vigilance FG Haarlem_Squadron with 3 ships
Python launched purist Admonisher FG Red_Bluff_Squadron with 19 ships
Python launched purist Vigilance FG Red_Bluff_Squadron with 3 ships
Python launched purist Pacifier FG Sebastopol_Squadron with 19 ships
Python launched purist Vigilance FG Sebastopol_Squadron with 3 ships
Python launched purist Plowshare FG Augusta_Squadron with 19 ships
Python launched purist Vigilance FG Augusta_Squadron with 3 ships
Python launched forsaken Hyena.stock FG Medford_Squadron with 2 ships
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield03 percent 0.250000
Python launched forsaken Corvette FG Medford_Squadron with 1 ships
Python launched LIHW Robin.stock FG Bradford_Squadron with 7 ships
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.199074
Upgrading Shield4 quadshield06 percent 0.692308
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.199074
Upgrading Shield4 quadshield06 percent 0.692308
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield06 percent 0.134615
Upgrading Shield4 quadshield06 percent 1.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield06 percent 0.134615
Upgrading Shield4 quadshield06 percent 1.000000
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield05 percent 0.160606
Upgrading Shield4 quadshield05 percent 1.000000
Python launched LIHW Ox FG Bradford_Squadron with 1 ships
Python launched LIHW Robin.stock FG Pittsburg with 9 ships
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield05 percent 0.160606
Upgrading Shield4 quadshield06 percent 0.846154
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield03 percent 0.261905
Upgrading Shield4 quadshield03 percent 1.000000
Upgrading Engine engine00 percent 0.217391
Upgrading Shield dualshield04 percent 0.199074
Upgrading Shield4 quadshield04 percent 1.000000
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield06 percent 0.134615
Upgrading Shield4 quadshield04 percent 1.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield06 percent 0.134615
Upgrading Shield4 quadshield04 percent 1.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.151515
Upgrading Shield dualshield03 percent 0.261905
Upgrading Shield4 quadshield05 percent 0.636364
Python launched LIHW Hammer.stock FG South_Hadley_Squadron with 7 ships
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Python launched LIHW Ox FG South_Hadley_Squadron with 1 ships
Python launched uln Hyena.stock FG Magnificently_Squadron with 2 ships
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield03 percent 0.285714
Upgrading Shield4 quadshield01 percent 1.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Python launched uln Yeoman FG Magnificently_Squadron with 1 ships
Python launched uln Ancestor.stock FG Devotedly_Squadron with 2 ships
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield05 percent 0.160606
Upgrading Shield4 quadshield05 percent 1.000000
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Python launched uln Gleaner FG Devotedly_Squadron with 1 ships
Python launched uln Ancestor.stock FG Courteously_Squadron with 2 ships
Upgrading Engine engine00 percent 0.217391
Upgrading Shield dualshield02 percent 0.500000
Upgrading Shield4 quadshield02 percent 1.000000
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield01 percent 1.000000
Upgrading Shield4 quadshield03 percent 0.285714
Python launched uln Yeoman FG Courteously_Squadron with 1 ships
Python launched uln Hyena.stock FG Fretfully_Squadron with 2 ships
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield01 percent 1.000000
Upgrading Shield4 quadshield03 percent 0.257143
Upgrading Engine engine00 percent 0.500000
Upgrading Shield dualshield01 percent 1.000000
Upgrading Shield4 quadshield01 percent 1.000000
Python launched uln Hyena.stock FG Vindictively_Squadron with 4 ships
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield06 percent 0.153846
Upgrading Shield4 quadshield04 percent 0.187500
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield06 percent 0.153846
Upgrading Shield4 quadshield06 percent 0.125000
Upgrading Engine engine00 percent 0.217391
Upgrading Shield dualshield04 percent 0.222222
Upgrading Shield4 quadshield02 percent 0.500000
Upgrading Engine engine00 percent 0.125000
Upgrading Shield dualshield04 percent 0.222222
Upgrading Shield4 quadshield04 percent 0.187500
Python launched uln Gleaner FG Vindictively_Squadron with 1 ships
Python launched uln Hyena.stock FG Vicariously_Squadron with 2 ships
Upgrading Shield2 level 0... percent=1.0
Upgrading Shield4 level 0... percent=1.0
Upgrading Engine engine00 percent 0.107143
Upgrading Shield dualshield05 percent 0.181818
Upgrading Shield4 quadshield05 percent 0.150000
Python launched uln Gleaner FG Vicariously_Squadron with 1 ships
Python launched klkk Dostoevsky FG alert with 16 ships
Python launched klkk Kierkegaard FG spiteful_Squadron with 1 ships
Python launched klkk Dostoevsky FG weird_Squadron with 4 ships
Python launched mechanist Llama FG Moroccan_Squadron with 4 ships
Python launched mechanist watson FG Moroccan_Squadron with 1 ships
Python launched mechanist Convolution FG Formosa_Squadron with 2 ships
Python launched mechanist Llama FG Anacreon_Squadron with 4 ships
Python launched mechanist watson FG Anacreon_Squadron with 1 ships
Python launched rlaan_citizen Shenzong FG Aleck with 4 ships
Python launched rlaan_citizen Shizu.civvie FG Aleck with 5 ships
Python launched rlaan_citizen Gaozong FG Aleck with 6 ships
Python launched rlaan_citizen Shizong FG Aleck with 17 ships
Python launched merchant_guild_citizen Entourage FG Abigail with 11 ships
Python launched merchant_guild_citizen Quicksilver.civvie FG Abigail with 1 ships
Python launched merchant_guild_citizen Plowshare.civvie FG Abigail with 10 ships
Python launched merchant_guild_citizen Ox FG Abigail with 1 ships
Python launched andolian_citizen Sartre.civvie FG (CivReg) Pretoria with 5 ships
Python launched andolian_citizen Quicksilver.civvie FG (CivReg) Pretoria with 3 ships
Python launched andolian_citizen Llama.civvie FG (CivReg) Pretoria with 3 ships
Python launched andolian_citizen Franklin.civvie FG (CivReg) Pretoria with 5 ships
Python launched andolian_citizen Mule FG (CivReg) Pretoria with 2 ships
Python launched andolian_citizen MacGyver FG (CivReg) Pretoria with 3 ships
Python launched andolian_citizen Ox FG (CivReg) Pretoria with 4 ships
Python launched andolian_citizen Sartre.civvie FG Tanya with 6 ships
Python launched andolian_citizen Kafka.civvie FG Tanya with 8 ships
Python launched andolian_citizen Quicksilver.civvie FG Tanya with 5 ships
Python launched andolian_citizen Llama.civvie FG Tanya with 1 ships
Python launched andolian_citizen Franklin.civvie FG Tanya with 6 ships
Python launched andolian_citizen MacGyver FG Tanya with 1 ships
Python launched andolian_citizen Ox FG Tanya with 5 ships
Python launched andolian_citizen MacGyver FG Charybdis with 12 ships
Python launched purist_citizen Entourage FG Walton with 1 ships
Python launched purist_citizen GTIO.civvie FG Walton with 2 ships
Python launched purist_citizen H496 FG Walton with 4 ships
Python launched purist_citizen Diligence FG Walton with 3 ships
Python launched purist_citizen Quicksilver.civvie FG Walton with 1 ships
Python launched purist_citizen Llama.civvie FG Walton with 2 ships
Python launched purist_citizen Mule FG Walton with 2 ships
Python launched purist_citizen Plowshare.civvie FG Walton with 5 ships
Python launched purist_citizen Mule.civvie FG Walton with 7 ships
Python launched purist_citizen Ox FG Walton with 4 ships
Python launched forsaken_citizen H496 FG Belshazzar with 1 ships
Python launched forsaken_citizen Llama.civvie FG Belshazzar with 1 ships
Python launched forsaken_citizen Gleaner FG Belshazzar with 3 ships
Python launched forsaken_citizen Mule FG Belshazzar with 2 ships
Python launched forsaken_citizen Hyena.civvie FG Belshazzar with 2 ships
Python launched forsaken_citizen Yeoman FG Belshazzar with 1 ships
Python launched forsaken_citizen H496 FG Vaughan with 2 ships
Python launched forsaken_citizen Llama.civvie FG Vaughan with 2 ships
Python launched forsaken_citizen Gleaner FG Vaughan with 3 ships
Python launched forsaken_citizen Mule FG Vaughan with 1 ships
Python launched forsaken_citizen Koala.civvie FG Vaughan with 3 ships
Python launched forsaken_citizen Hyena.civvie FG Vaughan with 1 ships
Python launched forsaken_citizen Yeoman FG Vaughan with 1 ships
Python launched uln_citizen Llama.civvie FG Garfunkel with 3 ships
Python launched uln_citizen Koala.civvie FG Garfunkel with 8 ships
Python launched uln_citizen Mule FG Garfunkel with 2 ships
Python launched uln_citizen Gleaner FG Garfunkel with 4 ships
Python launched uln_citizen Dodo.civvie FG Garfunkel with 3 ships
Python launched uln_citizen Entourage FG Browne with 4 ships
Python launched uln_citizen Koala.civvie FG Browne with 5 ships
Python launched uln_citizen Mule FG Browne with 1 ships
Python launched uln_citizen Gleaner FG Browne with 6 ships
Python launched uln_citizen Dodo.civvie FG Browne with 3 ships
Python launched klkk_citizen Llama.civvie FG (CivReg) Westfield with 8 ships
Python launched klkk_citizen Sartre.civvie FG (CivReg) Westfield with 7 ships
Python launched klkk_citizen Kafka.civvie FG (CivReg) Westfield with 11 ships
Python launched klkk_citizen Ox FG (CivReg) Westfield with 2 ships
Python launched klkk_citizen Llama.civvie FG Getty with 4 ships
Python launched klkk_citizen Sartre.civvie FG Getty with 5 ships
Python launched klkk_citizen Mule FG Getty with 2 ships
Python launched klkk_citizen Kafka.civvie FG Getty with 10 ships
Python launched klkk_citizen Ox FG Getty with 2 ships
Python launched klkk_citizen Llama.civvie FG (CivReg) Munich with 6 ships
Python launched klkk_citizen Sartre.civvie FG (CivReg) Munich with 9 ships
Python launched klkk_citizen Mule FG (CivReg) Munich with 1 ships
Python launched klkk_citizen Kafka.civvie FG (CivReg) Munich with 2 ships
Python launched klkk_citizen Ox FG (CivReg) Munich with 5 ships
conditioning
nonzeroing
finding quest
quest_drone
dot -0.551671dot 0.604574dot 0.685250Processing News
 *** Python Warning 1!
Warning Traceback 1:
  File "MiningBasedayklkk.py", line 10, in ?
    None
  File "b/mining_lib.py", line 5, in MakeMining
    dynamic_mission.CreateMissions()
  File "m/dynamic_mission.py", line 757, in CreateMissions
    news.processNews(plr)
  File "m/news.py", line 103, in processNews
    noos = dnewsman_.translateDynamicString(noos)
  File "m/dynamic_news.py", line 304, in translateDynamicString
    keys = self.data.makeNewsKeyList(varlist, self.dockedat_faction, self.getPOV(varlist))
  File "m/dynamic_news.py", line 340, in getPOV
    debug.error("ERROR:  VS is returning -0 for relationship relatagg number")
Message: ERROR:  VS is returning -0 for relationship relatagg number

curr: <campaign_lib.CampaignClickNode instance at 0xd51558c>
[<campaign_lib.CampaignChoiceNode instance at 0xd51e9cc>]
curr: <campaign_lib.CampaignChoiceNode instance at 0xd51e9cc>
[<campaign_lib.CampaignNode instance at 0xd51e9ec>, <campaign_lib.CampaignNode instance at 0xd51e90c>]
curr: <campaign_lib.CampaignNode instance at 0xd51e90c>
[<campaign_lib.CampaignClickNode instance at 0xd51e8ec>, <campaign_lib.CampaignNode instance at 0xd51e92c>]
curr: <campaign_lib.CampaignNode instance at 0xd51e92c>
[<campaign_lib.CampaignClickNode instance at 0xd51ed4c>, <campaign_lib.CampaignNode instance at 0xd51ee0c>, <campaign_lib.CampaignClickNode instance at 0xd51eecc>]
curr: <campaign_lib.CampaignNode instance at 0xd51e92c>
[<campaign_lib.CampaignClickNode instance at 0xd51ed4c>, <campaign_lib.CampaignNode instance at 0xd51ee0c>, <campaign_lib.CampaignClickNode instance at 0xd51eecc>]
curr: <campaign_lib.CampaignNode instance at 0xd51ee0c>
[<campaign_lib.CampaignClickNode instance at 0xd51e84c>, <campaign_lib.CampaignClickNode instance at 0xd51e4ac>]
curr: <campaign_lib.CampaignClickNode instance at 0xd51e4ac>
[<campaign_lib.CampaignChoiceNode instance at 0xdee626c>]
curr: <campaign_lib.CampaignChoiceNode instance at 0xdee626c>
[<campaign_lib.CampaignNode instance at 0xdee628c>, <campaign_lib.CampaignNode instance at 0xdee618c>]
curr: <campaign_lib.CampaignNode instance at 0xdee628c>
[<campaign_lib.CampaignClickNode instance at 0xdee62ec>]
<campaign_lib.CampaignClickNode instance at 0xdee62ec>
[]
*** still no contingency
Setting Screen to w 1669 h 967 and pitch of 6676 and 32 bpp 4 bytes per pix mode
Reshaping 1669 967Found ship named : Gleaner
Found ship named : Dostoevsky
Found ship named : Crucible/Cephid_17
Found ship named : Llama
Found ship named : Crucible/Cephid_17
Found ship named : Admonisher
Found ship named : Crucible/Cephid_17
Found ship named : Admonisher.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Admonisher.stock
Found ship named : Crucible/Cephid_17
Found ship named : Ancestor
Found ship named : Crucible/Cephid_17
Found ship named : Ancestor.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Convolution
Found ship named : Crucible/Cephid_17
Found ship named : Convolution.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Derivative
Found ship named : Crucible/Cephid_17
Found ship named : Derivative.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Derivative.stock
Found ship named : Crucible/Cephid_17
Found ship named : Determinant
Found ship named : Crucible/Cephid_17
Found ship named : Determinant.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Determinant.stock
Found ship named : Crucible/Cephid_17
Found ship named : Dodo
Found ship named : Crucible/Cephid_17
Found ship named : Dodo.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Dodo.stock
Found ship named : Crucible/Cephid_17
Found ship named : Llama.stock
Found ship named : Crucible/Cephid_17
Found ship named : Dostoevsky.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Dostoevsky.stock
Found ship named : Crucible/Cephid_17
Found ship named : Gawain
Found ship named : Crucible/Cephid_17
Found ship named : Gawain.highbornspec
Found ship named : Crucible/Cephid_17
Found ship named : Gawain.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Gawain.stock
Found ship named : Crucible/Cephid_17
Found ship named : Goddard
Found ship named : Crucible/Cephid_17
Found ship named : Goddard.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Hyena.hunter
Found ship named : Crucible/Cephid_17
Found ship named : Hyena
Found ship named : Crucible/Cephid_17
Found ship named : Lancelot
Found ship named : Crucible/Cephid_17
Found ship named : Lancelot.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Plowshare
Found ship named : Crucible/Cephid_17
Found ship named : Pacifier
Found ship named : Crucible/Cephid_17
Found ship named : Pacifier.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Plowshare.stock
Found ship named : Crucible/Cephid_17
Found ship named : Progeny
Found ship named : Crucible/Cephid_17
Found ship named : Progeny.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Robin
Found ship named : Crucible/Cephid_17
Found ship named : Robin.stock
Found ship named : Crucible/Cephid_17
Found ship named : Schroedinger
Found ship named : Crucible/Cephid_17
Found ship named : Schroedinger.stock
Found ship named : Crucible/Cephid_17
Found ship named : Schroedinger.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Shizu
Found ship named : Crucible/Cephid_17
Found ship named : Shizu.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Shizu.stock
Found ship named : Crucible/Cephid_17
Found ship named : Sickle
Found ship named : Crucible/Cephid_17
Found ship named : Sickle.stock
Found ship named : Crucible/Cephid_17
Found ship named : Vendetta.stock
Found ship named : Crucible/Cephid_17
Found ship named : Hammer
Found ship named : Crucible/Cephid_17
Found ship named : Hammer.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Hammer.stock
Found ship named : Crucible/Cephid_17
Found ship named : Llama.begin
Found ship named : Crucible/Cephid_17
Found ship named : Mule
Found ship named : Crucible/Cephid_17
Found ship named : Mule.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Mule.stock
Found ship named : Crucible/Cephid_17
Found ship named : GTIO
Found ship named : Crucible/Cephid_17
Found ship named : Sartre
Found ship named : Crucible/Cephid_17
Found ship named : Kafka
Found ship named : Crucible/Cephid_17
Found ship named : Ox
Found ship named : Crucible/Cephid_17
Found ship named : Ox.stock
Found ship named : Crucible/Cephid_17
Found ship named : Shizong
Found ship named : Crucible/Cephid_17
Found ship named : Shizong.milspec
Found ship named : Crucible/Cephid_17
Found ship named : Shizong.stock
Found ship named : Crucible/Cephid_17
Faction not found assigning default one : privateer !!!
   Exiting ReadSavedPackets
Writing Save Game AutosaveError: Cannot Open Unit Admonisher.stock from save file player.
Error: Cannot Open Unit Ancestor from save file player.
Error: Cannot Open Unit Convolution from save file player.
Error: Cannot Open Unit Convolution.milspec from save file player.
Error: Cannot Open Unit Derivative from save file player.
Error: Cannot Open Unit Determinant from save file player.
Error: Cannot Open Unit Determinant.stock from save file player.
Error: Cannot Open Unit Dodo.milspec from save file player.
Error: Cannot Open Unit Dostoevsky.milspec from save file player.
Error: Cannot Open Unit Gawain from save file player.
Error: Cannot Open Unit Lancelot from save file player.
Error: Cannot Open Unit Lancelot.milspec from save file player.
Error: Cannot Open Unit Pacifier from save file player.
Error: Cannot Open Unit Pacifier.milspec from save file player.
Error: Cannot Open Unit Progeny from save file player.
Error: Cannot Open Unit Robin from save file player.
Error: Cannot Open Unit Robin.stock from save file player.
Error: Cannot Open Unit Schroedinger from save file player.
Error: Cannot Open Unit Shizu from save file player.
Error: Cannot Open Unit Shizu.milspec from save file player.
Error: Cannot Open Unit Sickle from save file player.
Error: Cannot Open Unit Sickle.stock from save file player.
Error: Cannot Open Unit Vendetta.stock from save file player.
Error: Cannot Open Unit Hammer from save file player.
Error: Cannot Open Unit Hammer.milspec from save file player.
Error: Cannot Open Unit Hammer.stock from save file player.
Error: Cannot Open Unit Mule from save file player.
Error: Cannot Open Unit Mule.milspec from save file player.
Error: Cannot Open Unit Mule.stock from save file player.
Error: Cannot Open Unit GTIO from save file player.
Error: Cannot Open Unit Sartre from save file player.
Error: Cannot Open Unit Kafka from save file player.
Error: Cannot Open Unit Ox from save file player.
Error: Cannot Open Unit Ox.stock from save file player.
Error: Cannot Open Unit Shizong from save file player.
Error: Cannot Open Unit Shizong.milspec from save file player.
Error: Cannot Open Unit Shizong.stock from save file player.
Compiling python module bases/launch_music.py
Asking to undock
Segmentation fault
root@FRED-Mini-2:/home/vegastrike-0-5-0#
Wendy-J
Merchant
Merchant
 
Posts: 57
Topics: 2
Joined: Sat Nov 05, 2011 11:19 pm


PreviousNext

Return to General Modding

Who is online

Users browsing this forum: No registered users and 1 guest