0.5.1.r1 release is Ready

Just downloaded Vega Strike and need help? Have a question but don't know where to start? Ask here.

0.5.1.r1 release is Ready

Postby klauss » Sun Apr 01, 2012 11:55 am

0.5.1 r1 release is out the door.

We'll receive bug reports, as usual, and if the reported issues with fglrx can be worked around we'll be releasing maintenance versions as r2, r3 and so on.

We're using OpenSUSE's Build Service (OBS for short), and the packages are there already, so if you installed from OBS you should be able to update rather easily (hopefully, even with delta rpms :D ) - not all repos have been tested, so if you're on one of the unlucky ones to spot a packaging bug, please post on the bug tracker ASAP.

vegastrike-music and vegastrike-speech were unchanged so you don't have to update. "Updated" versions are there since r1 is the first official (non-beta) release.

Linux

You can look for the packages in OBS' search interface, or you can set up the repos from the urls below (which is the best way to get updates):

For the most popular linux distros (available in OBS), we have zypper/deb repos:

Notes for RPM-bsed distros (Fedora, openSuse)

Most RPM-based distros use yum or yum-compatible tools, so you just have to download the repo description into the proper path: "sudo wget {repository path}/{repo name}.repo -O /etc/yum.repos.d/{repo name}.repo" (for openSuse, it's /etc/zypp/repos.d). You'll probably have to browse the repository to find the "repo name" (it's not evident from the above links, derived from OBS project settings).

It should prompt whether to import the repo key next time you update metadata, with zypper refresh or yum update.

Other distros

If your distro is not on the list, source tar balls and data packages can be downloaded directly from sourceforge:


Instructions for building from source and installing data from the tarballs in your home folder would go like this, assuming you've downloaded the pertinent tarballs and dependencies already:

Code: Select all
~$ mkdir vegastrike-0.5.1.r1
~$ tar xvjf vegastrike-src-0.5.1.r1.tar.bz2
~$ cd vegastrike-src-0.5.1.r1
~/vegastrike-src-0.5.1.r1$ mkdir build
~/vegastrike-src-0.5.1.r1$ cd build
~/vegastrike-src-0.5.1.r1/build$ cmake ..
...
~/vegastrike-src-0.5.1.r1/build$ make
...
~/vegastrike-src-0.5.1.r1/build$ cd ../../vegastrike-0.5.1.r1
~/vegastrike-0.5.1.r1$ mkdir bin
~/vegastrike-0.5.1.r1$ cp ../vegastrike-src-0.5.1.r1/build/{vegastrike,vegaserver,setup/vssetup,objconv/mesh_tool} bin/.
~/vegastrike-0.5.1.r1$ tar xvjf ../vegastrike-data-0.5.1.r1.tar.bz2 --strip-components=1
...
~/vegastrike-0.5.1.r1$ tar xvjf ../vegastrike-extra-0.5.1.r1.tar.bz2 --strip-components=1
...
~/vegastrike-0.5.1.r1$ tar xvf ../vegastrike-music-0.5.1.r1.tar --strip-components=1
...
~/vegastrike-0.5.1.r1$ tar xvf ../vegastrike-speech-0.5.1.r1.tar --strip-components=1
...


You can obviously skip the unpacking of the optional download packs.

Windows

Windows is up and ready. You can download from SourceForge download area.

Bug reports

Many distros (not all) have a vegastrike-debuginfo or vegastrike-dbg package you can use to install debugging info and provide better stacktraces for bug reporting - please, when reporting a crash-type bug, install that package and run vegastrike through gdb:

Code: Select all
$ gdb --args vegastrike --debug=3 2>stderr.txt
(gdb) run
...
Segmentation Fault
(gdb) bt full
<paste this in your bug report>


Also include all information about which distro and platform you're running, GPU brand and model, driver versions, the output of the "glxinfo" command, the captured output of vegastrike itself (stderr.txt from the above commands), all of which could potentially include useful information for tracking down the bugs.
Last edited by klauss on Thu Jul 04, 2013 5:25 pm, edited 9 times in total.
Reason: Added Ubuntu 13.04
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Share On:

Share on Facebook Facebook Share on Twitter Twitter Share on Digg Digg

Re: 0.5.1.r1 release is Ready

Postby loki1950 » Sun Apr 01, 2012 2:50 pm

Just posted an update to the my announcement about the 0.5 release on the Linux Format forums so we may get some more downloads very soon :D

Enjoy the Choice :)
my box:Q8200/Asus P5QDLX/2 G ram/WD 2Tb 2-500 G HD/GF GT640 2Gb fedora 20 Win 7 acer S243HL X193W
amd XP1800 on a asusA7N8x/ 789Mb ram/ sda 120 Gb ntfs sdb 80 Gb ext3 (fedora 10) gForce 6800 gt 128 Mb
User avatar
loki1950
The Shepherd
 
Posts: 5506
Topics: 50
Joined: Fri May 13, 2005 1:37 pm
Location: Ottawa

Re: 0.5.1.r1 release is Ready

Postby pheonixstorm » Mon Apr 02, 2012 3:37 am

Windows binary is posted. Install problems should be posted in the bugs forum.
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1563
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: 0.5.1.r1 release is Ready

Postby pheonixstorm » Mon Apr 02, 2012 2:16 pm

Release has been posted on our download.com Does anyone know of any other download sites i should try out?
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1563
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: 0.5.1.r1 release is Ready

Postby klauss » Mon Apr 02, 2012 6:11 pm

Well, someone has put VS on desura.

I contacted desura to give me dev access and they have, but really the one that did the first release should do this one (because it will take me some time to learn it).
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby pheonixstorm » Mon Apr 02, 2012 8:18 pm

No way to find out? I had to setup a new account on download.com to get a new release up. Never heard back from ace123 for the account info for it. I also setup a facebook page for us as the only other one I found was from the wikipedia page.
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1563
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 12:00 am

I just submitted VS on OBS for the official games repo, which is the staging ground for Factory and then the official distribution.

Cross your finges ;)

(they're quite picky about packaging guidelines)
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby log0 » Tue Apr 03, 2012 6:43 am

@klauss
I am wondering if one could create is a graphics benchmark mission to get Vegastrike into Phoronix test suite. Maybe there is already one? You've got some nice heavy planet shaders, just find a configuration which runs with mesa drivers without triggering a fallback. It would increase the exposure of the game and get a few contributors maybe.
log0
 

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 7:44 am

We'd need some scripting first - like a cutscene. We don't have scripting of that kind yet, but it's been a feature request for ages.

Maybe, when we have such scripting, we could put together a benchmark cutscene.
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby log0 » Tue Apr 03, 2012 8:03 am

I see. What about something simple as starting the mission with autopilot enabled? Or maybe start the mission with a certain position, velocity, hehe.
log0
 

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 8:05 am

It wouldn't cut it, benchmarks have to be very stable (always do the same).
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby Dunkelheit » Tue Apr 03, 2012 1:17 pm

I dont know how to install it
You know you have been raytracing too long when ...
... You take a photo course just to learn how to get the lighting right.
User avatar
Dunkelheit
Merchant
Merchant
 
Posts: 62
Topics: 11
Joined: Tue Mar 04, 2008 8:34 pm

Re: 0.5.1.r1 release is Ready

Postby pheonixstorm » Tue Apr 03, 2012 1:22 pm

using??
Because of YOU Arbiter, MY kids? can't get enough gas. OR NIPPLE! How does that mkae you feeeel? ~ Halo
User avatar
pheonixstorm
Elite
Elite
 
Posts: 1563
Topics: 113
Joined: Mon Jan 25, 2010 7:03 pm

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 1:23 pm

Dunkelheit wrote:I dont know how to install it


Which operating system?
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby Dunkelheit » Tue Apr 03, 2012 1:31 pm

oh sorry, ubuntu 11.04
I downloaded data, and installed deb package but nothing happens, I assume ther will be a launcer on the menu but it dont, so I type vegastrike on terminal and got this :
Code: Select all
error while loading shared libraries: libboost_python-py27.so.1.42.0: cannot open shared object file: No such file or directory
You know you have been raytracing too long when ...
... You take a photo course just to learn how to get the lighting right.
User avatar
Dunkelheit
Merchant
Merchant
 
Posts: 62
Topics: 11
Joined: Tue Mar 04, 2008 8:34 pm

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 1:38 pm

I didn't get to test the ubuntu .desktop item yet.

You can launch from the console as "vegastrike".

Did you use the 11.04 repo from OBS to install?
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby Dunkelheit » Tue Apr 03, 2012 6:14 pm

So what I did:
Go to the 11.04 link posted here above, downloaded from folder 'i396' the VS deb package, installed, then downloaded form folder 'all' the vs data all package, and installed, and as I said the console show me this:
libboost_python-py27.so.1.42.0: cannot open shared object file: No such file or directory


I dont find that with synaptic
What I'm doing wrong? I guess that is the way

PD: now I have the launcher on my menu but nothing happens when I click it
You know you have been raytracing too long when ...
... You take a photo course just to learn how to get the lighting right.
User avatar
Dunkelheit
Merchant
Merchant
 
Posts: 62
Topics: 11
Joined: Tue Mar 04, 2008 8:34 pm

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 6:24 pm

Ah, nonono...

You have to follow the instructions there.

Not sure it will fix it, but installing directly from the .deb is probably not a good idea.

About the libboost_python stuff, I'll look into it.
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby klauss » Tue Apr 03, 2012 6:32 pm

klauss wrote:Not sure it will fix it, but installing directly from the .deb is probably not a good idea.

About the libboost_python stuff, I'll look into it.


Yes, I think following the instructions and installing with synaptic will fix it. Installing from the .deb directly doesn't install the dependencies (one of which is libboost-python).
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby log0 » Wed Apr 04, 2012 4:13 am

Have been following the instructions on http://en.opensuse.org/openSUSE:Build_S ... urces.list

Stuck adding apt-key. How is it supposed to look for the repo?

wget https://api.opensuse.org/source/home:kl ... re/_pubkey fails due to Authorization Required.
log0
 

Re: 0.5.1.r1 release is Ready

Postby klauss » Wed Apr 04, 2012 7:37 am

I think it's wrong... interesting...

Try:

http://download.opensuse.org/repositori ... elease.key

I'll have to link the repo keys in the announcement...

There, I fixed it in the wiki :)
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby log0 » Wed Apr 04, 2012 9:57 am

Next issue:
Some dependencies can not be resolved: libswscale0, ..., libavformat52. Available versions are libswscale2, ..., libavformat53. Anyone an idea where to get the older libs from for Ubuntu 11.10. Atm I am inclined to compile vs from source.
log0
 

Re: 0.5.1.r1 release is Ready

Postby klauss » Wed Apr 04, 2012 10:22 am

It's rebuilding with the correct dependencies now.
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina

Re: 0.5.1.r1 release is Ready

Postby log0 » Wed Apr 04, 2012 1:51 pm

Installation was successful.
At start ran into: error while loading shared libraries: libboost_python-py27.so.1.46.1: cannot open shared object file: No such file or directory
Found libboost_python-py27.so.1.42.0 installed.
Fixed with sudo apt-get install libboost-python1.46.1

Menu link works, sky box and Llama are rendered without errors. As I suspected the Intel Linux driver is in much better shape than the Windows one.
log0
 

Re: 0.5.1.r1 release is Ready

Postby klauss » Wed Apr 04, 2012 2:01 pm

log0 wrote:Installation was successful.
At start ran into: error while loading shared libraries: libboost_python-py27.so.1.46.1: cannot open shared

It should have installed it automatically as a dependency.

Edit: Nope, only 1.42.0 was set as a dependency - Added 1.46.1 and it should now work automatically (as soon as it finishes building).
Oíd mortales, el grito sagrado...
Call me "Menes, lord of Cats"
Wing Commander Universe
User avatar
klauss
Elite
Elite
 
Posts: 7251
Topics: 55
Joined: Mon Apr 18, 2005 7:40 am
Location: LS87, Buenos Aires, República Argentina


Next

Return to User Help

Who is online

Users browsing this forum: No registered users and 1 guest

cron